You don't have Macromedia Flash Player installed.
This content requires the Macromedia Flash Player.
Get Flash
Pumps, Pipes, Valves & Insulation
Covers, a user friendly product that can be manufactured and shipped for any application world wide. Temp-Set Removable Insulation Covers meet MMS, ABS, and Coast Guard regulations with approval no. 164009.
For more information sei@insulationsei.com
New Regular-Port, Fire-Safe Flanged Ball Valves
New fire-safe TRIAC F91 stainless steel flanged ball valves use a regularport design to minimize cost and reduce operating torque, while offering rugged construction with a solid unibody and patented pyramidal stem packing. The
ANSI-class 150 valves are fire-safe, comply with the NACE MRO175 standard for corrosion resistance, and are certified to API 607-4th edition. The live-loaded pyramidal stem packing system features a patented 45° primary seal with Belleville washers and chevron packing, protecting against wear and stem leaks common with ordinary ball
TRIAC F91
MARINE GLASS -- FOR SAFETY AND SECURITY ON THE SEAS
valves. An automation pad allows direct mounting of ISO5211-compliant actuators to eliminate the cost and fabrication of special couplings or brackets. F91 valves are available in sizes 0.5 to 6-in. in manual and automated versions, with electric or pneumatic actuators, springreturn or double-acting configuration.
For more information sales@a-tcontrols.com
M
A R I N E G L A S S offers exceptional safety and security in passenger vessels, work boats, and military applications. Bonded with tough high performance interlayers, Marine Glass laminates can be designed to provide effective ballistics, bomb and blast protection, as well as security and storm protection. This toughened, high performance glass is available in flat or bent configurations and resists moisture, water vapor, chemical attack, and UV. Clear or tinted glass is available.
See us at WorkBoat Show in New Orleans at Booth # 482
ProCurve Glass Technology, LLC 3535 Davisville Road Hatboro, PA 19040 U.S.A. 215- 441-9101 Fax 215-441-9190 e-mail : procurveglass@nni.com www. procurveglass.com
'Push Fit' Tube Connector
Parker Instrumentation offers a new design of tube connector that is assembled by means of a push-fit operation. The new connectors provide permanent connections for fluid systems operating at up to 20,000 psi/1,379 bar. Parker estimates that its new Phastite fittings
could reduce installation costs by a factor of 90 percent or more compared to standard solutions. "There has been little significant change in industrial tube fitting design for 50 years," said Parker Instrumentation's Steve Mullen. "We have devised a connector that radically changes the economics of fluid system building." Phastite employs a compression assembly principle using a novel form of toothed profile, which makes the seal. The connectors are supplied as onepiece components. To make a joint, all that's required is to insert the tube, and then push the collar along the connector body until it reaches a dead stop. This operation is performed by a simple handheld hydraulic tool, and takes a few seconds. Inside Phastite connectors is a
50 Maritime Reporter & Engineering News